發明
美國
13/541,647
US 8,723,403 B2
發光二極體混光元件LIGHT ASSEMBLY WITH LIGHT-MIXING FUNCTION
國立中央大學
2014/05/13
綜上所述,目前既有的白光LED封裝形式都有難以克服的缺點,但不論是光萃取效率、演色性、製作成本,對於商品化都是非常重要的因素,有感於此,為解決目前白光LED 發展的窘境,我們提出新的混光元件,於藍光晶片上放置玻璃片,玻璃片兩面分別填入不同色的螢光粉陣列,並且螢光粉陣列間有可讓藍光直接通過的間隙,藉以增加藍光的光通量。此外,螢光粉陣列中由於每一點螢光粉都非常小,故得以減少激發出的光被其他螢光粉再吸收的損耗。若再搭配半導體量子點使用,因量子點的特殊光學特性,亦可得到高的演色性,因此我們期望此新型混光架構會有高光萃取效率、高演色性、低製作成本等優點,更甚者,可以為LED照明相關產業帶來新的想法和突破。然而在植物照明之光源方面,傳統上是利用紅光與藍光LED交叉排列來進行混光,但在光源使用數量上會相當大,造成成本的提升。使用此混光元件,可以製造不同濃度厚度的螢光粉(或量子點)玻璃板,來調整藍光以及紅光的比例,也可搭配不同粉體,達到不同的藍紅光波長組合,使得植物生長所需的光合作用頻譜能夠與光元所發射出頻譜相匹配,進而達到良好的光合作用。 But these elements are so important for white light LEDs to be commercialized, so because of these reason, we pull out all the stops to develop a new color-mixing element. We put a thin glass board in front of the LED die, and there is different color phosphor dots array on the two sides of that glass. In addition, there are some intervals between phosphor dots, so blue lights can go through that glass without absorption, and we can get a luminance flux enhancement. Moreover, each dot is very small to prevent lights from being absorbed by other phosphors. And we can add some quantum dots to enhance CCT because of their unique optical characteristics. Above all, we suppose this new color-mixing element should have high extraction efficiency, high CRI and low cost. Even more, this promising device would bring new ideas to people and a new break- through in LED industry
智權技轉組
03-4227151轉27076
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院