發明
中華民國
103132720
I 576525
洩壓閥組件Relief Valve Assembly
財團法人國家同步輻射研究中心
2017/04/01
在低溫設備及傳輸管路的設計及實務操作上,由於低溫流體受熱時有快速及高倍膨脹的風險,必須在儲槽、管路末端或是閥門之間裝設氣體洩壓閥,以保護設備及人員的安全。 但是對低溫流體的製造系統而言,其對於內部氣體純度的要求甚高,即使只有少量的不純物質存在低溫系統與管路之中,也將對低溫系統造成重大傷害。但是在過去的使用經驗中,氣體洩壓閥經噴發作動排出遠低於室溫的流體後,常因噴發處附近的水氣凝結成冰而導致閥門閉合不全,使閥門即使在降壓後仍維持持續開啟的狀況,導致雜氣進入系統。 為有效改善此一高度危害低溫系統的問題,我們開發出一套外掛於低溫氣體洩壓閥體上的防凍結遮氣罩,此遮氣罩為開放式,故不影響洩壓閥的正常排氣保護功能,又可在噴發處附近建立高純度氣體環境,適當隔絕環境中的水氣及雜質,避免其凝結於低溫的洩壓閥噴發口;因此當內壓降低後,洩壓閥門可正常關閉,以確保不純氣體等汙染物擴散至系統管路之中。 A cryogenic plant produces cryogenic fluids and always requires high-purity process gas. Once a relief valve opens due to high internal pressure, the ejected gas is extremely cold and cools down the valve body very quickly. The water vapor in the air thus condenses to water and soon freezes to ice on the valve surface and the seal of the relief valve to stop it from complete shut-off even when the internal pressure is reduced to low. All kinds of gases in the air will then diffuse into the cryogenic system and cause troubles. The relief valve assembly with anti-frozen shielding hat can solve this problem. When the relief valve is opened, high purity process gas will soon accumulate inside the shielding hat to prevent the relief valve body from air. Thus nothing can condense or freeze on the valve seal during the ejecting process. Once the internal pressure reduces, the relief valve can fully close and isolate the process gas from air. The cryogenic system is thus secured.
產業企劃室
03-5780281 分機8418
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院