發明
中華民國
102112889
I 481891
垂直式二維差動摺疊型霍爾裝置
國立臺北科技大學
2015/04/21
本計畫的主要工作旨在以CMOS標準製程來整合霍爾磁場元件與讀出電路於同一顆IC上,並建立馬達控制與位移量測系統,以實測結果來評估新設計之磁場感測元件的良莠。主要的研究內容分為兩個部份。第一部份是Folding magnetic sensor的應用研究,計畫將IC化之讀出電路分別嵌入感測元件內,形成兩個單晶片,一個是Folding magneto-sensor晶片,另一個是MAGFET晶片(對照用),再將該兩個晶片應用於馬達控制與位移量測系統上,評估Folding magnetic sensor的應用成效,再進一步修正Folding magnetic sensor的結構與理論模型;第二部份是新磁場感測元件的開發,希望在標準CMOS製程技術下進行Hall-plate magnetic sensor (HP)與Magneto-transistor (MT)兩種元件的開發工作,其中Hall-plate magnetic sensor (HP)元件主要是線性輸出特性的研究,而Magneto-transistor (MT)則是靈敏度的研究。 The main objective of this research project is not only to systematically integrate the magnetic sensor with readout circuit in a chip through a CMOS standard IC process, but also to establish the motor driving control system and the displacement measuring system whose are used to estimate the performances of new magnetic sensors. Hence the researches to be performed in this project are separated into two parts. One is focused on the application and modification of folding magnetic sensor; the other is the development of new magnetic sensor. In the front part, there are two chips are fabricated with readout circuit, folding magnetosensor and MAGFET. There are both used to control the motor driving and to measure the displacement from a conducting line.
專利技轉組
02-87720360
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院