以可組合式建築模組模擬建築火災煙流之方法 | 專利查詢

以可組合式建築模組模擬建築火災煙流之方法


專利類型

發明

專利國別 (專利申請國家)

中華民國

專利申請案號

105102141

專利證號

I 582630

專利獲證名稱

以可組合式建築模組模擬建築火災煙流之方法

專利所屬機關 (申請機關)

國立雲林科技大學

獲證日期

2017/05/11

技術說明

本發明之系統及方法其係整合多項偵測/控制模組並且使用於縮小模型火災實驗,因此將此系統命名為「火災整合式縮小模型實驗系統」,本系統配置了各種火災物理感測器來進行訊號蒐集,可安裝在各種預先搭建之縮小模型內,進行數據之傳輸與控制。以觀察在不同火源強度下,目標建築物火場空間內之熱輻射強度、環境溫度、一氧化碳濃度、能見度及空間之煙層淨高等隨時間之變化情況,並透過連結各種主動及被動之消防控制模組,如防火門、進氣與排煙風扇、氣簾與撒水等來進行各種消防與煙流控制之行為,透過模擬與實驗間之比對,可研判各類構造及用途不同之場所,在面對各種不同火源發生位置與強度之情況下,其消防安全與緊急逃生設計是否完善。 This invention integrates multiple detection/control modules utilized in the fire experiments of reduced model and is named as the fire's integrated reduce-model experimental system, FIRES. This system deploys different physical sensors to collect signals and installs all kinds of pre-built reduced model for data transmitting and control. And to observe the variation over time of thermal radiation intensity, ambient temperature, CO concentration, visibility, and smoke layer height within a fire that happened in the target building. Also through the linkage of a variety of active and passive fire control module, such as fire doors, air intake and exhaust fans, air curtain, and sprinklers to conduct fire prevention and smoke control behaviors. Through the comparisons between simulation and experiment, one can decide whether the fire safety and emergency evacuation design is suitable for a site of different structure and purpose, while facing different ignition strength and position.

備註

本會(收文號1120003127)同意該校112年1月11日雲科大研字第1120500024號函申請終止維護專利(國立雲林科技大學)

連絡單位 (專責單位/部門名稱)

智財管理組

連絡電話

(05)5342601轉2521


版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院