發明
中華民國
102142635
I 515466
光纖通訊方法及光纖通訊系統
義守大學
2016/01/01
如何將光耦入光纖,一直是光通訊技術的重要題材,目前將光能量耦合至光纖的技術多半為透過介質來使其耦光效率增加,因為光纖纖蕊的直徑很小(~約10 μm),就以單模光纖而言,其數值孔徑也只有0.17左右,因此即使透過了介質來進行耦光動作也是相當麻煩與不便的。因為二階布拉格光纖光柵的物理特性有垂直輻射的效果,因此利用此特性將光源由光纖外部,直接垂直入射二階光纖光柵表面,就可以透過二階光纖光柵來耦光,不需要在透過任何介質來進行耦光的動作。 The coupling light into fiber is very important technology in fiber optic communication. The lens are used to couple light into fiber. Because of the small diameter of the fiber core (~10μm) and small numerical aperture (~0.17) for single mode fibers, it is still very difficult to couple the light into single mode fibers with lens. An important property of second-order fiber Bragg gratings (FBGs) is surface-normal radiation. In this technology, second order FBGs have been used to couple light into a fiber without using any lens or medium.
本部(收文號1070059224)同意該校107年8月15日義大產字第1070010511號函申請終止維護專利。
產學智財營運總中心產學合作與專利技轉中心
07-6577711ext2683
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院