具有多重固相微萃取探針的熱脫附游離裝置、質譜系統,及質譜分析方法 | 專利查詢

具有多重固相微萃取探針的熱脫附游離裝置、質譜系統,及質譜分析方法


專利類型

發明

專利國別 (專利申請國家)

中華民國

專利申請案號

102143464

專利證號

I 488215

專利獲證名稱

具有多重固相微萃取探針的熱脫附游離裝置、質譜系統,及質譜分析方法

專利所屬機關 (申請機關)

國立中山大學

獲證日期

2015/06/11

技術說明

本技術是結合多管固相微萃取法(multiple SPME)、熱脫附法(thermal desorption, TD)及電噴灑游離法(electrospray ionization, ESI)技術開發出可快速分析不同樣品之 熱脫附電噴灑游離質譜法(thermal desorption electrospray ionization mass spectrometry, TD-ESI/MS),藉由固相微萃取技術進行濃縮、吸附取樣及脫附進樣,來提升熱脫附 電噴灑游離質譜法的靈敏度。而SPME-TD-ESI/MS游離技術之操作方式是利用固相微 萃取之纖維探針對分析物進行頂空或直接萃取,再將其探針直接插入高溫的熱脫附裝 置中,此時吸附在纖維上的分析物因高溫影響而進行熱脫附,產生中性氣相待測分 子,其藉由熱氣流帶動到電噴灑離子雲中進行後游離(post-ionization),產生離子-分子 反應(Ion-molecule Reaction, IMR)而得到分析物離子,最後再由質量分析器進行質量 的鑑定。另外,本技術改良傳統SPME單一探針取樣方式,發展具多重萃取纖維探針, 藉由增加纖維數量以增加靜相吸附體積,在相同萃取時間下提高分析物萃取量,以提 高其靈敏度。本研究方法和先前的直接探針取樣之TD-ESI/MS技術相比,在分析揮發 性較高的樣品時,能夠將偵測極限降低3個級數,因此藉由SPME多重探針進行快速取 樣,可去除基質干擾效應,縮短樣品萃取時間並相當適合應用在揮發性化學成份之分 析,提高TD-ESI/MS質譜分析技術快速篩選分析之應用性。 The sampling and ambient mass spectrometric system consists of three parts: (1) the SPME system for sampling and pre-concentrating trace chemical compounds in solution; (2) the thermal chamber for thermally desorbing analytes adsorbed on the SPME fiber; and (3) the electrospray ionization unit for post-ionizing the desorbed analytes. After establishing adsorption equilibrium between the analytes and the sample matrix, a polymer-coated SPME fiber was inserted in a preheated thermal chamber to desorb the analytes from the fiber. The analytes were then delivered into an ESI plume by a stream of hot nitrogen gas. Analyte ions were formed by interacting with charged solvent species in the ESI plume and were subsequently detected by a triple quadruple mass analyzer.

備註

連絡單位 (專責單位/部門名稱)

產學營運及推廣教育處

連絡電話

(07)525-2000#2651


版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院