發明
中華民國
100121403
I 431910
電感飽和偵測及反飽和之控制系統及方法
國立臺北科技大學
2014/03/21
一種電感飽和偵測及反飽和之控制系統及方法,適用於一切換式電源供應裝置,該控制方法包括下述步驟:偵知該切換式電源供應裝置的電感輸出電流;將電感輸出電流值代入一關聯表以取得對應的一驅動訊號;提供一電流產生模組,以驅動訊號驅使電流產生模組產生一補償電流,且補償電流與電感的電流方向相反;提供一反飽和電感,接受電流產生模組產生的補償電流之注入以調控該電感的磁場強度。 本專利藉由偵測電感電流的振幅以作為飽和的判斷依據,並同時使用差動放大器和電流感測放大器來監控電感電流漣波和輸出電流。而反飽和調控的原理是,藉由類比數位轉換器(Analog-to-Digital Converter, ADC)將電感電流漣波和輸出電流轉換成數位訊號,經由串列匯流排介面(Serial Peripheral Interface, SPI)送入微控制器(MCU),以判斷電感是否飽和。當飽和發生時,微控制器透過串列匯流排介面來控制數位類比轉換器(Digital-to-Analog Converter, DAC),經由電壓控制電流源(Voltage-Controlled Current Source, VCCS)電路,輸出一個電流源信號到電感補償繞組端以調控飽和現象。 n this patent, the amplitude detection is used herein to judge whether the inductor is saturated or not. At the same time, the inductor current ripple and the output current are monitored via the differential amplifier and the current sensing amplifier. The basic operating principles of the proposed anti-saturation control strategy are to be described as follows. First, the digital signals created from the inductor current ripple and output current are obtained via the analog-to-digital converters (ADCs). After this, these digital signals are sent to the microcontroller unit (MCU) so as to judge whether the inductor is saturated or not. When the inductor saturation occurs, the MCU creates a digital compensation signal, and such a signal is sent to the ADC after the series peripheral interface (SPI) to activate the voltage-controlled current source (VCCS) circuit.
本部(收文號1060040584)同意該校106年6月19日北科大產學字第1067900147號函申請終止維護專利
專利技轉組
02-87720360
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院