發明
美國
14/053,612
US 8,913,687 B2
訊號傳輸系統與訊號傳輸電路SIGNAL TRANSMISSION SYSTEM AND SIGNAL TRANSMISSION CIRCUIT
義守大學
2014/12/16
高速I / O訊號之間的傳遞通常會因為傳輸訊號的衰減或是雜訊的產生使原本訊號產生失真,若無適當的設計,將使接收電路無法檢測或接收到傳輸的訊號。所以本發明針對將輸入電壓訊號與輸出電壓訊號準位一致下的條件下去設計電路架構,提出運用雙緣觸發脈衝電路去解決對於訊號傳遞間所衍生的問題,並針對運用於電容耦合互聯晶片間之傳輸提出收發電路之設計。此概念主要肇因於高頻傳輸時並不需要直流電氣成份的連接,只要一個良好的交流聯繫就可完成非接觸式訊號傳輸之實現。而藉由交流電容耦合互聯之方式來傳輸訊號和接收訊號時,經由雙緣觸發脈衝的產生來代表傳輸訊號的帶寬,再結合一放大電路使其在接收端部分將其訊號回復,以改善信號衰減失真之問題。 The use of the double edge of trigger pulse circuit can then solve the signal distortion problems. The transceiver circuit design based on capacitive coupling is applied to the inter-chip communications. The proposed double edge trigger pulse can detect the rising edge and falling edge of the transmitted signal. For data communications, the double edge trigger pulse generator uses voltage transitions at the midsymbol period instead of voltage levels to carry information. It then combines with an amplifier circuit such that the transmitted signals can restore back to their original signals at the receiving end without the signal attenuation distortion problem.
產學智財營運總中心產學合作與專利技轉中心
07-6577711ext2683
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院