發明
中華民國
100130910
I 463757
智能化電力管理系統、裝置及模組
義守大學
2014/12/01
變壓器因過載產生過熱而導致毀損事件時有所見,傳統變壓器在過載時其唯一警示方式為其箱體之溫度指示儀表或是感溫貼紙,然而此一方式無法有效事前預警,時常造成變壓器因為過載而燒損,甚至內部絕緣油因高溫噴出而造成人員之傷害。本專利針對變壓器設計一智能管理裝置,此一裝置可量測變壓器之電壓、電流與溫度之類比信號,並隨時計算出變壓器之功率與運轉溫度等,除平常掌握變壓器之負載而支援負載管理,提升運轉效率之外,變壓器發生過載之前亦能透過通訊方式,即時回報至監控主站,如此能在事故發生前有效預警,減少變壓器燒損及可能之人員傷害。 另外此裝置亦能根據變壓器負載量及溫度之監測,透過與用戶端之雙向通訊功能,執行用戶設備之負載管理,避免變壓器之過載與支援需量反應功能。 Distribution transformers often burn out due to problems of overloading and internal insulation damage. The analog thermometer and temperature sensor sheet are applied for detection of transformer overloading for the conventional practice. By this practice, the alarm signal cannot be generated in advance for on line early warning to prevent the transformer damage and the public safety introduced by the spillage of high temperature insulation oil. This patient proposes an intelligent transformer management module, which is used to measure the voltage, current, temperature for calculating the power loading and monitoring the thermal stress of transformer. In case of transformer overloading and over temperature, the alarm signal will be generated and reported to the control station via various types of communication schemes.
產學智財營運總中心產學合作與專利技轉中心
07-6577711ext2683
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院