RFID標籤定位演算方法 | 專利查詢

RFID標籤定位演算方法


專利類型

發明

專利國別 (專利申請國家)

中華民國

專利申請案號

099102400

專利證號

I 411806

專利獲證名稱

RFID標籤定位演算方法

專利所屬機關 (申請機關)

國立屏東科技大學

獲證日期

2013/10/11

技術說明

一種RFID標籤定位演算方法,在一含有目標標籤的定位空間內佈設複數個參考標籤及3至4個天線,接著製作天線之無線訊號衰減曲線圖,再依據無線訊號衰減曲線圖利用此天線量得目標標籤之RSSI值,以獲得天線和目標標籤之量測距離。接著,以天線和量測目標標籤之RSSI值,根據該天線k之無線訊號衰減曲線圖,計算天線k和量測目標標籤之距離。次將一含有該目標標籤之定位空間切成n個網格,分別計算天線距n個網格中心點之直線距離及計算天線對目標標籤所做之量測距離和網格中心之直線距離之誤差,之後,對於每一天線所計算出之誤差值進行比較,可得到3或4組誤差值最小的網格;以及比對不同組中該些誤差值最小的網格,從其中選擇誤差值最小者為該目標標籤之位置。 A method of positioning a RFID tag using spatial mesh algorithm is disclosed. Radio Frequency Identification (RFID) readers are arranged in a space having a RFID tag therein to be positioned. To position the RFID tag, the space is then divided into a plurality of rectangular spatial boxes. Calculating each distance between a center of rectangular spatial box and each RFID reader is followed to obtain a set of distances for each RFID reader. The differences between the set of distances by calculation for each reader and the distance by measurement are compared and analyzed to find a set of rectangular spatial boxes having minimum differences for each reader. By comparing the set of rectangular spatial boxes having minimum differences for each reader, the position of the RFID tag is determined.

備註

依112.03.27.本會112年第1次研發成果管理審查會決議辦理 本會(收文號1120005672)同意該校112年1月19日屏科大建字第1121300020號函申請終止維護專利(國立屏東科技大學)

連絡單位 (專責單位/部門名稱)

研究發展處

連絡電話

08-7703202轉6281


版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院