發明
中華民國
104116457
I 548432
點滴定速系統
弘光科技大學
2016/09/11
本計畫成果係結合軟體、電機、電子、機械壓力機構方式來實現一個可由系統自動定速、定時、定量之點滴定速與監測系統,能夠以行動裝置-平板電腦在任何時間任何地點進行點滴速度設定,使點滴保持定速狀態;可辨別點滴袋正確掛置,只需將對的點滴吊上本發明的機構;系統即能於確認點滴正確性後,自動進入點滴流速監測,系統具備連線後端醫療資訊系統之界面,能夠接收來自於醫生之點滴醫囑,可在護理人員監視下自動地執行對病人的點滴醫療;藉由此點滴自動控制特性,系統可將點滴滴注之過程進行定時、定量、間歇式等之全自動程式化控制本系統所發展之裝置與機構具低成本特性,並且,系統具有未來之可擴充性,如:可加入緊急求救按鈕、生理訊號收集等功能,成為一個整合性的近床照護設備與系統。 We have invented an automatic, smart, active IV flow rate controlling, and monitoring system. The system is mainly to control IV flow rate with constant speed by adjusting the mechanical stress on the IV tube according to the feedback from the flow rate measuring Component. More specifically, our system is composed of four components: an IV flow rate controller, an IV dripping timer, an IV drip feeder, and an IV dripping scheduler. The IV flow rate controller receives a flow rate command from the central unit and turns the camshaft, attached on the stepping motor. The camshaft lifts the IV tube pressure bar up or down to make different pressures on the IV tube. Eventually, the IV flow rate is at a designated constant speed.
研究發展處
04-26318652轉2205
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院