發明
中華民國
102140076
I 530022
天線結構
國立交通大學
2016/04/11
傳統的天線反射板多為線性變化之金屬板,其可能使得天線輻射出來之電場無法均勻,無法有效輻射,進而浪費了發射功率。即要高輻射效率與窄波束寬需要較大的反射板,此不只增加整體天線的尺寸大小,還增加重量,此不符合經濟效益。因此,本發明以階數不同之皺褶金屬波導作為天線反射板,微調末端短路之路徑長短與波導尺寸,可使其輻射電場之分布均勻,進而增加天線輻射效益。另外,適當調整皺褶金屬板波導之尺寸,也可改變電場分布,得到想要之輻射場型,如傾斜一小角度。 The baffles act as a transition from an antenna to the free space. Most of the conventional antenna baffles are composed of linear taper metallic plates. However, the plate may not be a good candidate for an antenna baffle because it cannot maintain a uniform electric field at the end of the baffle. The disordered electric field degrades the aperture efficiency and consumes the radiating power. Here, we develop a finned baffle for the improvement of antenna performance instead of the conventional baffle. Through properly adjusting the structural parameters of the finned baffle, the distribution of the electric field can be manipulated. Moreover, in the certain practical applications, the unsymmetrical finned baffles are adopted for producing a tilt beam.
本會(收文號1110027136)回應該校111年5月12日陽明交大研產學字第1110015716號函申請終止維護專利(國立陽明交通大學)
智慧財產權中心
03-5738251
版權所有 © 國家科學及技術委員會 National Science and Technology Council All Rights Reserved.
建議使用IE 11或以上版本瀏覽器,最佳瀏覽解析度為1024x768以上|政府網站資料開放宣告
主辦單位:國家科學及技術委員會 執行單位:台灣經濟研究院 網站維護:台灣經濟研究院